Jordair “DF” Series Fill Station

FEATURES

• The DF series SCBA recharging system is a free standing and complete filling/de-fragmentation station for
  2216/3000 or 4500 PSIG cylinders. The SCBA refilling station is of a fully enclosed design to contain a SCBA or SCUBA
  cylinder failure or ruptured fill hose.
• The Jordair DF series fill stations are one of the safest the filling stations offered in Canada for the containment and
  recharging of SCBA cylinders.
• A fully enclosed SCBA containment system that encloses both the SCBA cylinders and the filling hoses with a tilting
  front access door. The door must be closed and locked before SCBA cylinders can be recharged.
• A toggle activated valve stops air flow to the filling points when the door is opened.
• The new door design for the fill stations is simple to operate and very user friendly. The spring lock system provides
  complete security when filling.
• The front access door is steel plate steel for optimum operator safety.
• The front access door is held in the closed position by a spring loaded pin type door lock.
• Heavy wall schedule 80 steel 8” pipe used to contain the SCBA cylinders within the recharge station.
• Anti-abrasion collars and liners in the SCBA containment sleeves to protect the exterior of the SCBA cylinders from
  abrasion damage during the filling process.
• 6000 PSIG inlet shut off valve to isolate the recharging station from the compressor and air storage cylinders.
• One anodized aluminum, self-venting and adjustable regulator with operating pressures from 0 to 6,000-PSIG inlets
  and 0 to 6,000-PSIG outlet pressures.
• Self-venting regulator comes complete with 4” inlet and discharge pressure gauges; gauges are rated for 7500 PSIG.
  Gauges read in both PSI and kPa.
• 2½” pressure gauges for 2216/3000 or 4500 PSIG filling, installed for each fill outlet to indicate SCBA recharge
  pressure. Gauges read in both PSI & kPa.
• Panel mounted SCBA cylinder shut off valves for 2216/3000 or 4500 PSIG fill positions.
• SCBA recharge assemblies are supplied for 2216/3000 or 4500 PSIG filling.
• A CRN certified safety relief valve is set for 2400/3200 or 4700 PSIG to protect the filling of the 2216/3000 or 4500
  PSIG SCBA or SCUBA cylinders.
• The SCBA 4500 PSIG cylinder fill hose assemblies will only recharge the high-pressure 4.5 SCBA cylinders. If a 2216
  SCBA cylinder is accidentally connected the 4500 PSIG filling hose the filling adaptor will automatically vent to
  atmosphere.
• All recharge hose assemblies are equipped with restriction orifices set to the CSA Z94.4 rate of 300 PSIG per minute,
  to control filling speed. When a cascade system is used, this prevents rapid cylinder expansion and significant
  pressure drop due to the compression heat created during a rapid refilling situation.
• All pressure piping conforms to ASME code B31.1 and B31.3

SPECIFICATIONS