Jordair “D” Series Fill Station

FEATURES

• The D series SCBA recharging system is a free standing and complete filling/de-fragmentation station for 2216,
  3000, 4500 and 5500 PSIG cylinders.
• The Jordair D series fill stations are the safest filling stations offered in Canada for the containment and recharging
  of SCBA cylinders.
• A fully enclosed SCBA containment system that encloses both the SCBA cylinders and the filling hoses with a ½”
  plate steel sliding front access door. The door must be closed and locked before SCBA cylinders can be recharged.
• A toggle activated valve stops air flow to the filling points when the door is opened.
• The front access door is held in the closed position by a spring loaded pin type door lock.
• Heavy wall schedule 80 steel 8” pipe used to contain the SCBA cylinders within the recharge station.
• Anti-abrasion collars and liners in the SCBA containment sleeves to protect the exterior of the SCBA cylinders from
  abrasion damage during the filling process.
• 7000 PSIG inlet shut off valve to isolate the recharging station from the compressor and air storage cylinders.
• One anodized aluminum, self-venting and adjustable regulator with operating pressures from 0 to 7,000-PSIG inlets
  and 0 to 7,000-PSIG outlet pressures.
• Self-venting regulator comes complete with 4” inlet and discharge pressure gauges; gauges are rated for 7500.
  Gauges read in both PSI & kPa.
• 2½” pressure gauges for 2216, 3000 or 4500 and 5500 PSIG filling, installed for each fill outlet to indicate SCBA
  recharge pressure. Gauges read in both PSI & kPa.
• Panel mounted SCBA cylinder shut off valves for 2216, 3000 or 4500, 5500 PSIG fill positions.
• SCBA recharge assemblies are supplied for the selected 2216, 3000, 4500 or 5500 PSIG filling.
• A CRN certified safety relief valve is set for 2400, 3200, 4700 PSIG to protect the filling of the 2216, 3000, 4500 PSIG
  SCBA or SCUBA cylinders.
• The SCBA 4500 and 5500 PSIG cylinder fill hose assemblies will only recharge the high-pressure 4.5 SCBA cylinders.
  If a 2216 SCBA cylinder is accidentally connected the 4500 PSIG filling hose the filling adaptor will automatically
  vent to atmosphere.
• All recharge hose assemblies are equipped with restriction orifices set to the CSA Z94.4 rate of 300 PSIG per minute,
  to control filling speed. When a cascade system is used, this prevents rapid cylinder expansion and significant
  pressure drop due to the compression heat created during a rapid refilling situation.
• All pressure piping conforms to ASME code B31.1 and B31.3.
• All D series fill stations have been third party tested and certified to 5500 PSIG by Intertek and Power Tech Labs

SPECIFICATIONS