Grace Industries® WorkForce® WF1
June 3, 2024
Grace Industries® MS2000X Lone-Worker Monitor
June 3, 2024
Grace Industries® WorkForce® WF2
SKU: WF2
Ideal for workforce management, the Grace Industries® WorkForce® WF2 offers advanced tracking and monitoring features to enhance safety and productivity in various work settings.
PRODUCT DESCRIPTION
The WorkForce® product line uses an advanced gyro/accelerometer sensor to detect a worker’s fall from heights and automatically transmits a wireless emergency alert without any action required by the worker. WorkForce® transmits this wireless emergency signal that is received by others facilitating a “prompt rescue”.
FEATURES
- General Purpose/Supervisory-All Duty Fall Detect & Lone Worker Device
- Used in ‘Buddy Package’ or as a ‘Supervisor’ to Monitor Other WorkForce® Users
- High Visibility LED Display of WorkForce® Users Name/Location
- Optional GPS Model for Use with Grace-Watch® and Mapping
- Displays Grace Locator Beacon Location of Other WorkForce® Users
- Displays Outdoor GPS Coordinates of Others (GPS Model) In Alarm
- Can Be Used with all Existing Grace Radio-H Systems
- Internal Antenna and Rechargeable Battery
- IP67 Dust Tight / Water Immersion
- EVAC (Evacuate) Button to Alert Other WorkForce® Users (Confined Space Model)
TECHNICAL DATA
Models of WorkForce
Feature Matrix |
LW Lone Worker Model Default Auto-On |
SM Supervisor Model Default Manual-On |
CS Confined Space Model Default Top Button EVAC |
AM Alarm Monitoring Default Alarm Monitoring of all devices |
GPS Outdoor Location Used with Grace-Watch Mapping |
Front Button PANIC |
Top Button PANIC |
Used with Grace Locator Beacon |
Alarm Display and Beacon ID |
Display Alarm and Beacon ID and GPS |
WF1-LW-090-xx |
Yes |
Yes |
Yes |
|||||||
WF1-LW-AM-090-xx |
Yes |
Yes |
Yes |
Yes |
||||||
WF1-LW-GPS-090-xx |
Yes |
Yes |
Yes |
|||||||
WF1-LW-AM-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF1-SM-090-xx |
Yes |
Yes |
Yes |
|||||||
WF1-SM-AM-090-xx |
Yes |
Yes |
Yes |
Yes |
||||||
WF1-SM-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
||||||
WF1-SM-AM-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-LW-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-CS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-SM-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-LW-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|||
WF2-CS-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|||
WF2-SM-GPS-090 -xx |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
* Features that are user configurable by using the USB configuration cable with Grace WorkForce PC software utility.
(-xx) Select Charger Type
-AC 120VAC -Wall Charger
-DC 12 VDC – Vehicular
-IC International Voltage
FACTORY DEFAULT 90 Second Motion Timing – Motion Timing is set to (090) seconds.
No Motion – when a user stops moving a timer begins to count down from the motion time setting.
The device will go into Pre-Alert approximately 15 seconds before he timer has reached full alarm at 0 seconds.
Pre-Alert is meant to prompt the user to move to reset the motion timer.
If the user moves during the Pre-Alert time, the Pre-Alert timer will reset, as long as it is not in full alarm.
If in full alarm, the user must press the two side buttons to reset the alarm.
Motion time setting is user configurable by using the USB configuration cable and Grace WorkForce software utility.
