Grace Industries® SuperCELL® SC500-SM
June 3, 2024
Grace Industries® WorkForce® WF2
June 3, 2024
Grace Industries® WorkForce® WF1
SKU: WF1
Tailored for efficient workforce management, the Grace Industries® WorkForce® WF1 provides reliable tracking and monitoring to improve safety and productivity in dynamic work environments. The WorkForce® product line uses an advanced gyro/accelerometer sensor to detect a worker’s fall from heights and automatically transmits a wireless emergency alert without any action required by the worker.
PRODUCT DESCRIPTION
The WorkForce® product line uses an advanced gyro/accelerometer sensor to detect a worker’s fall from heights and automatically transmits a wireless emergency alert without any action required by the worker. WorkForce® transmits this wireless emergency signal that is received by others facilitating a “prompt rescue”.
FEATURES
- General Purpose All Duty Fall Detect and Lone-Worker Worn Device
- Used in ‘Buddy Package’ or ‘Supervisor’ Device Configurations
- Can Be Used with Grace Locator Beacons
- GPS Option, Use with Grace-Watch® Mapping and/or WorkForce® WF2
- Compatible with all Existing Grace Radio-H Based Systems
- Internal Antenna
- Rechargeable Internal Battery
- IP67 Dust Tight / Water Immersion
TECHNICAL DATA
Models of WorkForce
Feature Matrix |
LW Lone Worker Model Default Auto-On |
SM Supervisor Model Default Manual-On |
CS Confined Space Model Default Top Button EVAC |
AM Alarm Monitoring Default Alarm Monitoring of all devices |
GPS Outdoor Location Used with Grace-Watch Mapping |
Front Button PANIC |
Top Button PANIC |
Used with Grace Locator Beacon |
Alarm Display and Beacon ID |
Display Alarm and Beacon ID and GPS |
WF1-LW-090-xx |
Yes |
Yes |
Yes |
|||||||
WF1-LW-AM-090-xx |
Yes |
Yes |
Yes |
Yes |
||||||
WF1-LW-GPS-090-xx |
Yes |
Yes |
Yes |
|||||||
WF1-LW-AM-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF1-SM-090-xx |
Yes |
Yes |
Yes |
|||||||
WF1-SM-AM-090-xx |
Yes |
Yes |
Yes |
Yes |
||||||
WF1-SM-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
||||||
WF1-SM-AM-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-LW-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-CS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-SM-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
|||||
WF2-LW-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|||
WF2-CS-GPS-090-xx |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|||
WF2-SM-GPS-090 -xx |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
* Features that are user configurable by using the USB configuration cable with Grace WorkForce PC software utility.
(-xx) Select Charger Type
-AC 120VAC -Wall Charger
-DC 12 VDC – Vehicular
-IC International Voltage
FACTORY DEFAULT 90 Second Motion Timing – Motion Timing is set to (090) seconds.
No Motion – when a user stops moving a timer begins to count down from the motion time setting.
The device will go into Pre-Alert approximately 15 seconds before he timer has reached full alarm at 0 seconds.
Pre-Alert is meant to prompt the user to move to reset the motion timer.
If the user moves during the Pre-Alert time, the Pre-Alert timer will reset, as long as it is not in full alarm.
If in full alarm, the user must press the two side buttons to reset the alarm.
Motion time setting is user configurable by using the USB configuration cable and Grace WorkForce software utility.
