Cres Guard® Mobile Decontamination Moist Heat

Introducing Cres Guard®, a mobile decontamination equipment developed by Cres Cor Health and Safety tested at 185 F, 65% Relative Humidity for 15 minutes to eradicate 99.9999% (6 log reduction) of extremely resistant viruses and bacteria.

Industry Usage

• Fire
• Police
• EMS
• Department of Defense
• Health Care Providers

FEATURES

• Uses Convection Heat with precision Humidity controls and just water. No chemicals involved and no residual toxicity or pungent odor.
• Designed for mobility around multiple sites, could be deployed directly at point of use.
  Pre-programmed decontamination parameters saving time and reducing variability between users ensuring the safety of every employee.
• Localized decontamination: Quick decontamination at the end of duty or after use reduces waiting time and prevents infection & cross-contamination.
• Can be used to decontaminate items that can withstand heat and humidity such as Web gear, Turnout gear such as Jackets, Trousers, Helmets, Gloves, Fire Hood, Bulletproof vests, Boots, etc.
• Cannot be used for electronics or items identified as a medical device by the FDA.
• Runs on standard 110V (20 Amp) and can be made in 240V configuration to support overseas operation.
• Fully insulated cabinet to decontaminate Personal protective equipment and gear at a recommended temperature of 185 F and humidity control at 65% RH for a 15-minute cycle. It is preset by the factory for repeatability and effective decontamination.
• Powerful, yet efficient 2000 Watts heating system maintains the right combination of heat and humidity for proper decontamination.
• The system maintains optimum conditions through continuous monitoring of both temperature and humidity. Temperature and humidity values are measured, displayed, and controlled through intuitive solid-state controller.
• New, easier to use, easy-to-read and operate LED digital display ensures holding at precise temperature and humidity.
• Low water indicating LED and water heater shut off when water is at critically low level to prevent damage to equipment and to achieve appropriate conditions for decontamination.
• Stainless steel construction throughout with internal frame in body and doors plus reinforced internal base maintains structural rigidity.
• Smooth interior coved corners prevent particle buildup and allows easy cleaning.
• Insulated doors with antimicrobial latches prevent temperature loss and protect against spreading germs. Silicone door gaskets for proper seal.
• Recessed push/pull handles on both sides prevent damage to walls; allows easy maneuvering.
• Stainless-steel support angles accommodate racks on adjustable 1-1/2″ centers; allows for modular configuration.
• Stainless steel hanger supports to accommodate hanging of gears such as jackets, trousers and vests.

SPECIFICATIONS

VIDEOS

RESOURCES

• Product Datasheet
• Operating Instructions
• Sell Sheet
• Independent Study Report