Jordair FIRE-KAT™ Compressor System

The Jordair FIRE-KAT compressor system features a single Bauer compressor block installed within a semi-enclosed frame. The compressor system provides a service friendly and technically advanced design with active customer interface.

All FIRE-KAT compressors are supplied with the Siemens Logo 8 PLC with a 6” panel mounted HMI screen. Adjacent to the PLC screen is the panel mounted CSA required CO monitor, Securus Moisture Monitor and ESD button. A high air temperature RTD with shut down & alarm as well as inter-stage and final pressure relief valves protect the compressor and its components. Oil pressure is monitored by a transmitter with an alarm and display.

Final pressure is limited by the final pressure transmitter setting. Jordair compressors are designed to automatically drain every 15 minutes into a silent collection system. All FIRE-KAT units Include nationally certified 7300 PSIG filter systems for added safety and an extended component life of 35 operating years.

Jordair breathing air compressors and filter systems meet or exceed the latest CSA standard CAN/CSA-Z180.1-19 (approved January 2019)

You can find the full scope of technical data and more in the downloadable brochure.

Ordering Information
Single Phase Voltages Available: (-1E) 208V, 230V
Three Phase Voltages Available: (-3E) 208V, 230V, 460V, 575V
When placing an order, add the voltage at the end of the model number (e.g. FIRE-KAT5-100-1E-230V)
Standard production is 60Hz, consult the factory for 50 Hz requirements and other voltages

FEATURES

• Logo 8 PLC with panel mounted 5″ x 8″ TP700 HMI screen showing compressor fault data
• Panel mounted CO monitor with regulator
• Panel mounted Securus Moisture Monitor
• Low oil pressure transmitter and alarm and screen display of the fault and actual operating data
• High temperature transmitter with alarm and screen display of the fault and actual operating data
• Final pressure transmitter set for customers required shut down pressure
• Final pressure displayed on the HMI screen
• Auto-run and manual mode operation with emergency shut down button
• Optional connection to the customer and service technicians cell phone
• Inter-stage and oil pressure gauges are mounted on the block and visible at the back side of the compressor
• Nationally certified CRN registered 7300 PSIG filter system matched to the compressor capacity
• Final separator cycle counter to ensure filter system safety and record pressure cycles
• Cycle count is displayed on the panel mounted HMI display screen
• Filter system life rated for 35 years or 100,000 pressure cycles
• Automatic condensate drain and silent collection system

SPECIFICATIONS

TECHNICAL DATA

Capacity Calculations
Note: Technical specifications are subject to change without notice
Compressor Flow Rate, or “Charge Rate”, is based on filling a 88 cubic (ft3) SCBA cylinder from the alarm set point of 1550 PSIG to 4500 PSIG

• Product Brochure