FSI® DAT1010S First Responder Decon Shower

The FSI® DAT1010S one person shower unit, comes with 7 spray nozzle heads and a single multi function trigger gun.

Complete with an integrally attached ground floor that will hold up to 50 gallons (200 liters) of water (with an 8”/20 cm berm approx.) before requiring pump out, 2 roll up windows – one on each side, 2 skylights, full closure slip in and out dirty entry/clean exit doors on each end, 1 air inflation/deflation valve, one air inflation hose w. safety cord, 1 pressure relief valve, 4 metal stakes, hammer and ground anchor points.

DAT1010S offered with 1 – 3/4″ (19 mm) GHT threaded inlet hose – other fittings available as specified. Decontamination can commence in less than 1 minute. Comes complete with electric inflator/deflator, stakes, 1 HVAC hanging duct, repair kit and high pressure SCBA fitting.

Note: ALL FSI® SHOWERS (as is feasible) MAY BE PURCHASED AS COMBINATION SHOWER SHELTER SYSTEMS AND ARE FULLY CONFIGURED PER CURRENT SHOWER SPECS. WITH ADDED OUTER CANOPY, INSULATING INNER CANOPY AND REMOVABLE DECON POOL/ SHOWER HEADS/CURTAINS AS DESIRED – PLEASE ASK FOR PART NOS. ADD 20% to current shower prices to get approx. List price. Final prices at FSI® discretion.

FEATURES

• Heavy Duty Air Berms
  FSI® utilizes extremely heavy duty air berm construction in all DAT® series mass casualty portable hazmat decon shower systems. FSI uses the same 1100Dtex, quadruple overlapped and glued berms found in our wide range of transom rescue boats – known for the extreme conditions they are subjected to.
• Extremely Rapid Deployment
  FSI® Portable Shower Systems are compact, fully integrated, and supplied complete in a heavy duty carry sleeve/bag. FSI® Shower systems inflate virtually unaided – with the use of compressed air, or via a supplied electric inflator/deflator with a hands-free connector within minutes (size of unit and method of inflation dependent). The inflatable decontamination shower units are meant to be deployed simply and quickly – with modest training and few personnel.
• Heavy Duty Construction
  No matter which model or size, FSI® shower systems offer incredible stability even in high wind conditions up to 70 mph (115 kph) and more when properly tied down/staked off.
• ANSI #113 Compliant – Ideal For Gross Decon Per NFPA 1851

SPECIFICATIONS

VIDEOS

RESOURCES

• Product Brochure
• Decon Shower Brochure
• FSI® Catalog