Grace Industries® Workforce® Supervisor Package

The Grace Industries® “Supervisor Package” includes alarm monitoring of coworkers and can display their name, ID, and location – Locator Beacon Sold Separately.

Supervisor Package Contents

• One (1) WorkForce® 1 Device
• One (1) WorkForce® 2 Device

Additional WorkForce® WF1 and WF2 and Locator Beacon units are also available on our web store, allowing you to take full advantage of WorkForce® WF2’s ability to monitor multiple devices. WorkForce® are advanced safety devices used by lone workers providing fall detection and motion sensing as part of a man-down alarm and monitoring system.

Note: This is a custom built system. We will contact you with lead time and estimated ship dates.

FEATURES

Workforce® 1 Features:

• General Purpose All Duty Lone Worker Worn Device – 90 second default alarm timing is user adjustable with PC Utility Tool
• Used in Buddy Package or Supervisor worn device configurations
• Can Be Used with Grace Locator Beacons
• GPS model used with Grace-Watch® Mapping and WorkForce® 2
• Can be used with existing Grace Radio-H systems
• Internal Antenna
• Rechargeable
• IP67 Dust Tight / Water Immersion

Workforce® 2 Features:

• General Purpose All Duty Lone Worker Worn Device
• High Visibility OLED Display
• Used in Buddy Package or as a Supervisor to monitor multiple users
• Displays Grace Locator Beacon Location of others in alarm
• Optional GPS receiver model for use with Grace-Watch® Mapping
• Displays outdoor GPS coordinates of others (GPS model) in alarm
• Can be used with existing Grace Radio-H systems
• Internal Antenna
• Rechargeable
• IP67 Dust Tight / Water Immersion
• EVAC (Evacuate) Alarm Button to alert users (confined space model)

SPECIFICATIONS

MODEL COMPARISON

*Features that are user configurable by using the USB configuration cable with Grace WorkForce® PC software utility.

(-xx) Select Charger Type
-AC 120VAC -Wall Charger
-DC 12 VDC – Vehicular
-IC International Voltage

FACTORY DEFAULT 90 Second Motion Timing – Motion Timing is set to (090) seconds.
No Motion – when a user stops moving a timer begins to count down from the motion time setting.
The device will go into Pre-Alert approximately 15 seconds before he timer has reached full alarm at 0 seconds.
Pre-Alert is meant to prompt the user to move to reset the motion timer.
If the user moves during the Pre-Alert time, the Pre-Alert timer will reset, as long as it is not in full alarm.
If in full alarm, the user must press the two side buttons to reset the alarm.
Motion time setting is user configurable by using the USB configuration cable and Grace WorkForce® software utility.

VIDEOS

RESOURCES

• User Information (WF1)
• User Information (WF2)
• WorkForce Literature