5-Piece Shutgun Kit
May 1, 2024
FSI® DAT1010S-SYS First Responder Decon Shower System Package
May 2, 2024
FSI® DAT1010S First Responder Decon Shower
The FSI® DAT1010S First Responder Decon Shower is a compact, portable decontamination unit designed for quick and effective rinsing of hazardous contaminants from emergency personnel.
PRODUCT DESCRIPTION
The FSI® DAT1010S one person shower unit, comes with 7 spray nozzle heads and a single multi function trigger gun.
Complete with an integrally attached ground floor that will hold up to 50 gallons (200 liters) of water (with an 8”/20cm berm approx.) before requiring pump out, 2 roll up windows – one on each side, 2 skylights, full closure slip in and out dirty entry/clean exit doors on each end, 1 air inflation/deflation valve, one air inflation hose w. safety cord, 1 pressure relief valve, 4 metal stakes, hammer and ground anchor points.
DAT1010S offered with 1 – 3/4″ (19mm) GHT threaded inlet hose – other fittings available as specified. Decontamination can commence in less than 1 minute. Comes complete with electric inflator/deflator, stakes, 1 HVAC hanging duct, repair kit and high pressure SCBA fitting.
FEATURES
- Heavy Duty Air Berms
FSI® utilizes extremely heavy duty air berm construction in all DAT® series mass casualty portable hazmat decon shower systems. FSI uses the same 1100Dtex, quadruple overlapped and glued berms found in our wide range of transom rescue boats – known for the extreme conditions they are subjected to. - Extremely Rapid Deployment
FSI® Portable Shower Systems are compact, fully integrated, and supplied complete in a heavy duty carry sleeve/bag. FSI® Shower systems inflate virtually unaided – with the use of compressed air, or via a supplied electric inflator/deflator with a hands-free connector within minutes (size of unit and method of inflation dependent). The inflatable decontamination shower units are meant to be deployed simply and quickly – with modest training and few personnel. - Heavy Duty Construction
No matter which model or size, FSI® shower systems offer incredible stability even in high wind conditions up to 70 mph (115 kph) and more when properly tied down/staked off. - ANSI #113 Compliant – Ideal For Gross Decon Per NFPA 1851
SPECIFICATIONS
| Dimensions | Approx. 3.5′ W X 3.5′ L X 8′ H |
|---|---|
| Area | 12 sq. ft. |
| Weight | 65 lbs. |
| Colors | FSI® Blue, Green, White, Tan/Sand. Other colors offered P.O.A. |
| Certification | NFPA 1851 |
