XL-800

Niedner's most popular attack hose. Lighter and more compact than competitive attack hoses, XL-800™ is a 100% polyester double jacket hose lined with TPU elastomer with a service test pressure of 400 PSIG (2800 kPa). This is the Number One choice for high-rise backpacks. For everyday attack fire fighting, XL-800™ is easily handled and packs tightly. The waterway is oversized to maximize flow and minimize friction loss. A third less bulk than rubber covered hose, XL-800™ is flexible to -60ºF (-51ºC). The ENCAP™ treated outer jacket improves durability, reduces water absorption up to 40% enhances chemical resistance and adds color options. Meets or exceeds NFPA 1961and ZZ-H-451.

UL label available on 1 1/2", 1 3/4" and 2 1/2" (38, 45 and 64 mm) sizes. Factory tested to 600 PSIG (4200 kPa).

Standard Lengths: 50' and 100' (15.2 and 30.5 m)  

Colors available: clear (white), green, red, orange, blue, purple, tan and yellow.  

RXL-800

Similar to XL-800™, RXL-800™ is a 100% polyester double jacket hose, lined with EPDM rubber liner for enhanced durability, kink resistance, and GPM flow, with a service test pressure rating of 400 PSIG (2800 kPa). RXL-800™ is another very popular attack hose choice, and is also often selected for high-rise backpacks.

REELTEX

A unique single jacket hose designed for use on hose reels, without the weight of traditional hard rubber hose. REELTEX® handles easily and is an excellent choice for CAF system use.  It is made of 100% polyester construction, with helical reinforcement, and red ENCAPTM treatment. Initially designed for wild land use, REELTEX® may be used in other applications but has limitations that should be taken into consideration. When using REELTEX® with foam eductor systems, normal hose lay limits may change. Note reel diameter minimum requirements in chart below. Patent No. 2168497.

CDHT3500SS HOSE TESTER

All STAINLESS manifold All STAINLESS heavy duty steel cart with 2 back wheels Low profile cart (4 wheels) also available in stainless POWERFUL 3.5 HP INDUSTRIAL OPEN DRIP PROOF motor Check valve assemblies available in brass at an extra cost  FULLY AUTOMATIC 2 1/2" (64 mm) check valve system on all 6 outlets (reduces labor - increases SAFETY) - comes standard with NST thread Large 5.6 GPM (21,28 L) OIL BATH pump, complete with thermal protective valve Delivers up to 500 PSI (3500kPa) pressure (Pressure washing equipment not included) Electrical connection - 240 v 2 1/2" (64 mm) NST female swivel inlet connector In-line filter included on all models Complies with NFPA standards One year limited warranty

CDHT1500SS HOSE TESTER

ALL STAINLESS manifold  All STAINLESS heavy duty low profile (4 wheels) steel cart Powerful 1.7 HP INDUSTRIAL TEFC (total enclosed fan cool) motor Check valve assemblies available in brass at an extra cost FULLY AUTOMATIC 1 1/2" (38 mm) check valve system on all 4 outlets (reduces labor - increases SAFETY).  NST thread standard - NPSH thread available upon request  Large 3.2 GPM (12,6 L) OIL BATH pump, complete with thermal protective valve Delivers up to 500 PSI (3447 kPa) pressure (pressure washing equipment not included) 1 1/2” (38 mm) NST female swivel inlet connector In-line filter included on all models Complies with NFPA standards One year limited warranty

SUPPLYLINE

The large diameter potable water hose (LDH) fire departments wish they always had. SUPPLYLINE™ is a 100% polyester, double jacket, TPU elastomer lined optable water hose with a service test pressure rating of 300 PSIG (2100 kPa). Compared to traditional  rubber LDH; SUPPLYLINE™ is lighter in weight, more compact, flexible to -60F (-51C), more abrasion and puncture resistant, approved for potable water, and can be loaded without hanging to dry. SUPPLYLINE™ potable water hose is also used as a Soft Suction hose in shorter lengths. The ENCAP™ treated outer jacket improves durability, reduces water absorption up to 40%, enhances chemical resistance, and adds color options.

Standard Lengths of this potable water hose: 50' and 100' (15,2m and 30,5 m).

Option: Colors available: clear (white), green, red, orange, blue, purple, tan and yellow.

INDUSTRIAL HOSE
LD 500

A single jacket industrial hose with a service test pressure of 300 PSI (2100 kPa) and constructed of 100% filament polyester lined with TPU elastomer. Yellow ENCAPTM treatment improves abrasion resistance and reduces water absorption. The high quality construction of LD 500 makes it an excellent choice for many single jacket utility hose applications.

Standard lengths: 50 and 100 ft (15,2 & 30,5 m)

HOTSTOP

With a design similar to REELTEX®, HOTSTOP® has greater heat and abrasion resistance by using Aramid fiber in place of polyester. This extends the melt point to 750°F (399°C) and the burn point to 800°F (427°C).  Performance features of REELTEX® apply equally to HOTSTOP®, but with standard yellow ENCAP™. When using HOTSTOP® with foam eductor systems, normal hose lay limits may change. Note reel diameter minimum requirements in chart below. Patent No. 2168497.

Standard lengths: 50' and 100' (15.2 et 30,5 m).

MAXXUM FFC

Niedner has raised the performance bar once again with the introduction of its latest double jacketed attack line - the MAXXUM™ FFC

Using “Fast Water Technology” this new 1 ¾” attack line makes it superior to all other hose